size: 6 x 6
DESCRIPTION
NOTE: There is no background in the decal, the background is
whatever surface you place decal on! In the picture the vinyl decal
is the white (paper background) would be whatever surface you apply it
to! Decal is only one (1) color!!!!
· Every decal sticker is removable and leaves no
residue.
· The lifetime of the vinyl is 6+ years.
· All our decals are machine cut from single
colored pieces of Oracal 651 Series vinyl. They are not printed on transparent
vinyl and have no transparent border.
· Every decal order comes with a set of
application instructions or check out HOW TO APPLY tab on any product page.
· White is the recommended color for car decals.
Installation
Notes:
Dry Method installation:
-
Tools needed: decal, squeegee or
credit card, soap and water, alcohol, paper towel and tape measure or
masking tape if needed for ease in alignment.
1. Clean area you wish to apply your decal with soap and water, dry
area and alcohol preferred decal location for a clean application area.
2. Once dry, simply peal the application tape from the decal
backing on an angle slowly. Note: if any part of the decal does not
transfer to the application tape simply lay tape back down and place on a hard
surface and burnish(rub) the decal with your squeegee or credit card and retry.
3. Once decal is removed from backing carefully place your decal in
the desired location. Note: pre plan ahead on angle and exact
placement of decal as there are no adjustments using this method. Once it
sticks that will be the location of the decal.
4. After placing decal on you desired surface, burnish the transfer
tape with your squeegee or credit card to apply and remove any air bubbles.
5. Peel transfer tape back at an angle slowly to expose your new
decal. If any part of the decal lifts up in this process, simply lay
transfer paper back down and burnish again. Continue to remove until
transfer paper is completely removed and your decal is attached to your
application surface.
6. Your are now finished and able to enjoy your new decal, wait
about 2 days before washing your vehicle. If placed on an indoor surface
like a glass bowl, hand wash only as needed.
Wet
Method installation:
-
Tools needed: decal, squeegee or
credit card, soap and water, spray bottle, alcohol, paper towel and
tape measure or masking tape if needed for ease in alignment.
1. Clean area you wish to apply your decal with soap and water, dry
area and alcohol preferred decal location for a clean application area.
2. Take spray bottle and fill with water and a couple drops of dish
soap. Spray application site liberally and simply peal the application
tape from the decal backing on an angle slowly. Note: if any part of the
decal does not transfer to the application tape simply lay tape back down and
place on a hard surface and burnish(rub) the decal with your squeegee or credit
card and retry.
3. Once decal is removed from backing spray your soap and water
solution liberally on the sticky part of the decal. Decal can now be
placed and be moved around until the desired location is reached.
4. After placing decal, burnish the transfer tape with your
squeegee or credit card to apply and remove all water and any air bubbles from
under the decal.
5. Peel transfer tape back at an angle slowly to expose your new
decal. If any part of the decal lifts up in this process, simply lay
transfer paper back down and burnish again. Continue to remove until
transfer paper is completely removed and you decal is attached to your
application surface.
6. Your are now finished
and able to enjoy your new decal, wait about 2 days before washing your
vehicle. If placed on an indoor surface like a glass bowl, hand wash only
as needed.